Brake system

See also:

License plate light bulb replacement
1. Loosen the retaining screws with a philips head screwdriver. 2. Remove the soket by turning it connterclockwise. 3. Remove the bulb by pulling it straight out. 4. Install a new bulb. 5. Reins ...

Styling
Revisions to the design of the Hyundai Santa Fe are concentrated on the finer details. At the front, the black two bar grille is replaced by chrome-edged three bar version, while revised headlight ...

Driving in flooded areas
Avoid driving through flooded areas unless you are sure the water is no higher than the bottom of the wheel hub. Drive through any water slowly. Allow adequate stopping distance because brake perf ...