Mist Wiper Operation

If a single wipe is desired in mist, move the windshield wiper and washer control lever up.
See also:
System operation
Ventilation
1. Set the mode to the position.
2. Set the air intake control to the outside (fresh) air position.
3. Set the temperature control to the desired position.
4. Set the fan speed contro ...
Certification label
The certification label is located on the driver's door sill at the center pillar.
This label shows the maximum allowable weight of the fully loaded vehicle. This
is called the GVWR (Gross Vehi ...
TEMPORARY SPARE TIRE
The following instructions for the temporary spare tire should be observed:
1. Check inflation pressure as soon as is practical after installing the spare
tire, and adjust to the specified pressure ...


