Blade replacement

When the wipers no longer clean adequately, the blades may be worn or cracked, and require replacement.

CAUTION

To prevent damage to the wiper arms or other components, do not attempt to move the wipers manually.

CAUTION

The use of a non-specified wiper blade could result in wiper malfunction and failure.

Front windshield wiper blade


Front windshield wiper blade

1. Raise the wiper arm.

CAUTION

Do not allow the wiper arm to fall against the windshield, since it may chip or crack the windshield.

2. Lift up the wiper blade clip. Then pull down the blade assembly and remove


2. Lift up the wiper blade clip. Then pull down the blade assembly and remove it.

3. Install the new blade assembly in the reverse order of removal.


3. Install the new blade assembly in the reverse order of removal.

    See also:

    POWER WINDOWS (If Installed)
    The power windows operate when the ignition key is in the "ON" position. The main switches are located on the driver's armrest and control the front (4/3 Door) and rear windows (4 ...

    Seat Belt Warning Light and Chime
    The driver's seat belt warning light and chime will activate to the following table when the ignition switch is in "ON" position. *1) Warning pattern repeats 11 times with an inte ...

    SEAT BELTS - Rear Seat Center 3- Point System With Emergency Locking Retractor
    1. Before fastening the rear seat center belt, confirm the metal tab (A) and buckle (B) are latched together. 2. After confirming that (A) and (B) are latched, pull the seat belt out of the r ...