See also:

License plate light bulb replacement
1. Loosen the retaining screws with a philips head screwdriver. 2. Remove the soket by turning it connterclockwise. 3. Remove the bulb by pulling it straight out. 4. Install a new bulb. 5. Reins ...

To install the wiper blade
1. Put a new wiper blade onto the wiper arm and lower the wiper blade at the level of the wiper arm as shown in the drawing. 2. Pull up the wiper blade until you hear an audible "click&quo ...

Owner maintenance schedule
When you stop for fuel: • Check the engine oil level. • Check coolant level in coolant reservoir. • Check the windshield washer fluid level. • Look for low or under-inflated tires. WARNING Be ca ...