Manual climate control system
To defog inside windshield
1. Select any fan speed except “0” position.
2. Select desired temperature.
3. Select the 
or
position.
4. The outside (fresh) air will be selected automatically.
If the outside (fresh) air position is not selected automatically, press the corresponding button manually.
To defrost outside windshield
1. Set the fan speed to the highest (extreme right) position.
2. Set the temperature to the extreme hot position.
3. Select the position.
4. The outside (fresh) air will be selected automatically.
See also:
Side Repeater Light
1. Push the cover toward the front of vehicle and remove it.
2. Disconnect the power code.
3. Replace with a new bulb. ...
Windshield Wiper and Washer Switch
Windshield wiper/washer
Rear window wiper/washer (If Installed)
A : Wiper speed control
· MIST – Single wipe
· OFF – Off
· INT – Intermittent wipe
· LO – Low wiper speed
· HI – High wiper s ...
Changing the climate control air filter
(For Evaporator and Blower Unit)
(If Installed)
The climate control air filter is located in front of
the evaporator unit behind the glove box.
It helps to decrease the amount of pollutants
enter ...