Room lamp
To turn the room lamp ON or OFF, push the switch or lens.
CAUTION
Do not leave the lamp switches on for an extended period of time when the vehicle is not running.
See also:
To install the wiper blade
1. Put a new wiper blade onto the wiper arm and lower the wiper blade at the
level of the wiper arm as shown in the drawing.
2. Pull up the wiper blade until you hear an audible "click&quo ...
Pre-tensioner seat belt
Your vehicle is equipped with driver's and front passenger's pre-tensioner seat
belts. The purpose of the pre-tensioner is to make sure that the seat belts fit
tightly against the occupa ...
KEYLESS ENTRY SYSTEM (If Installed)
This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any inter ...