Cruise SET indicator

The indicator light illuminates when the cruise function switch (SET- or RES+)


The indicator light illuminates when the cruise function switch (SET- or RES+) is ON.

The cruise SET indicator light in the instrument cluster is illuminated when the cruise control switch (SET- or RES+) is pushed. The cruise SET indicator light does not illuminate when the cruise control switch (CANCEL) is pushed or the system is disengaged.

Electronic power steering (EPS) system warning light This indicator light comes on after the ignition key is turned to the ON position


This indicator light comes on after the ignition key is turned to the ON position and then it will go out.

This light also comes on when the EPS needs repairs. If it comes on while driving, have your vehicle inspected by an authorized HYUNDAI dealer.

Key reminder warning chime

Without smart key

If the driver’s door is opened while the ignition key is left in the ignition switch (ACC or LOCK position), the key reminder warning chime will sound. This helps prevent you from locking your keys in the vehicle. The chime sounds until the key is removed from the ignition switch or the driver’s door is closed.

With smart key

If the driver’s door is opened while the smart key is in the vehicle with the engine start/stop button in ACC or the smart key is in the smart key holder with the engine start/stop button in OFF, the key reminder warning chime will sound. The chime sounds until the smart key is removed from the smart key holder or the driver’s door is closed.

    See also:

    To help prevent corrosion
    You can help prevent corrosion from getting started by observing the following: Keep Your Car Clean The best way to prevent corrosion is to keep your car clean and free of corrosive materials. At ...

    Bluetooth hands-free (if equipped)
    You can use the phone wirelessly by using the Bluetooth. Detailed information for the Bluetooth hands-free is described in the “audio” in this chapter or in the manual supplied separately. ...

    VENTILATION
    To operate the ventilation system: o Set the air intake control to "Fresh" mode (). o To direct all intake air to the dashboard vents, set the air flow control to the () position. o A ...