Impact sensing door unlock system (if equipped)

All doors will be automatically unlocked when the impact is delivered to impact sensors while the ignition switch is ON.

However, the doors may not be unlocked if mechanical problems occur with the door lock system or battery.

NOTICE

You can activate or deactivate some auto door lock/unlock features in the vehicle setting as follows;

• Speed sensing auto door lock • Auto door unlock by unlocking the driver's door • Auto door unlock when the ignition key is removed from the ignition switch or the smart key is removed from the smart key holder.

• Auto door lock/unlock by shifting the transmission shift lever out of P (Park) or into P (Park)

If you want to activate or deactivate some door lock/unlock feature, refer to the “vehicle setting” in this chapter.

    See also:

    Common Causes of Corrosion
    The most common causes of corrosion on your car are: o Road salt, dirt and moisture that is allowed to accumulate underneath the car. o Removal of paint or protective coatings by stones, gravel, abr ...

    Power Connector
    Your vehicle is equipped with a power connector to prevent battery discharge if your vehicle is parked without being operated for prolonged periods. Use the following procedures before parking t ...

    Emergency towing
    For emergency towing when no commercial tow vehicle is available, attach a tow cable, chain or strap to one of the towing hooks under the front/rear of your vehicle. Be very careful when attempt ...