See also:

Rear Combination Light
1. Open the trunk lid (4 Door) or tail gate (3 Door). 2. Remove the cover on the inside of luggage trim. 3. Remove the nuts of the rear combination light with a spanner. 4. Detach the rear ...

FLOOR MAT ANCHOR(S)
When using a floor mat on the front floor carpet, make sure it attaches to the floor mat anchor(s) in your vehicle. This keeps the floor mat from sliding forward. WARNING: The following must be ...

License plate light bulb replacement
1. Loosen the retaining screws with a philips head screwdriver. 2. Remove the soket by turning it connterclockwise. 3. Remove the bulb by pulling it straight out. 4. Install a new bulb. 5. Reins ...