System operation

Ventilation

1. Set the mode to the 2. Set the air intake control to the outside (fresh) air position. position.


2. Set the air intake control to the outside (fresh) air position.

3. Set the temperature control to the desired position.

4. Set the fan speed control to the desired speed.

Heating

1. Set the mode to the 2. Set the air intake control to the outside (fresh) air position. position.


2. Set the air intake control to the outside (fresh) air position.

3. Set the temperature control to the desired position.

4. Set the fan speed control to the desired speed.

5. If dehumidified heating is desired, turn the air conditioning system (if equipped) on.

Х If the windshield fogs up, set the mode to the position.,
Operation Tips position.


Operation Tips

Х To prevent dust or unpleasant fumes from entering the vehicle through the ventilation system, temporarily set the air intake control to the recirculated air position. Be sure to return the control to the fresh air position when the irritation has passed to keep fresh air in the vehicle. This will help keep the driver alert and comfortable.

Х Air for the heating/cooling system is drawn in through the grilles just ahead of the windshield. Care should be taken that these are not blocked by leaves, snow, ice or other obstructions.

Х To prevent interior fog on the windshield, set the air intake control to the fresh air position and fan speed to the desired position, turn on the air conditioning system, and adjust the temperature control to desired temperature.

Air conditioning

All HYUNDAI Air Conditioning Systems are filled with environmentally friendly R-134a refrigerant which does not damage the ozone layer.

1. Start the engine. Push the air conditioning button.

2. Set the mode to the 3. Set the air intake control to the recirculated air position. However, prolonged position.


3. Set the air intake control to the recirculated air position. However, prolonged operation of the reticulated air position will excessively dry the air. In this case, change the air position.

4. Adjust the fan speed control and temperature control to maintain maximum comfort.

Х When maximum cooling is desired, set the temperature control to the extreme left position then set the fan speed control to the highest speed.

NOTICE

Х While using the air conditioning system, monitor the engine temperature gauge closely while driving up hills or in heavy traffic when outside temperatures are high. Air conditioning system operation may cause engine overheating. Continue to use the blower fan but turn the air conditioning system off if the engine temperature gauge indicates engine overheating.

Х Opening the windows in humid weather while air conditioning operates may create water droplets inside the vehicle. Since excessive water droplets may cause damage to electrical equipment, air conditioning should only be used with the windows closed.

    See also:

    Brake discs, pads, calipers and rotors
    Check the pads for excessive wear, discs for run out and wear, and calipers for fluid leakage. ...

    Air Conditioning Refrigerant
    Check the air conditioning lines and connections for leakage and damage. Check air conditioning performance according to the relevant shop manual if necessary. ...

    Emission control system
    The emission control system of your vehicle is covered by a written limited warranty. Please see the warranty information contained in the OwnerТs Handbook & Warranty Information booklet in yo ...