Check spark plugs and ignition system
Inspect your spark plugs as described in section 7 and replace them if necessary. Also check all ignition wiring and components to be sure they are not cracked, worn or damaged in any way.
See also:
Drive Belts
Inspect all drive belts for evidence of cuts, cracks, excessive wear or oil saturation
and replace if necessary. Drive belts should be checked periodically for proper
tension and adjusted as neces ...
Vapor Hose and Fuel Filler Cap
The vapor hose and fuel filler cap should be inspected at those intervals specified
in the maintenance schedule. Make sure that a new vapor hose or fuel filler cap
is correctly replaced. ...
Automatic Transaxle Fluid
The fluid level should be in the “HOT” range of the dipstick, after the engine
and transaxle are at normal operating temperature. Check the automatic transaxle
fluid level with the engine running ...