See also:

Side Repeater Light
1. Push the cover toward the front of vehicle and remove it. 2. Disconnect the power code. 3. Replace with a new bulb. ...

Headlight aiming adjustment
Before performing aiming adjustment, make sure of the following. 1. Keep all tires inflated to the correct pressure. 2. Place the vehicle on level ground and press the front bumper & rear bump ...

Re-install Wheel Nuts
To reinstall the wheel cover, hold it on the studs, put the wheel nuts on the studs and tighten them finger tight. The nuts should be installed with their small diameter ends directed inward. Ji ...