Exhaust Pipe and Muffler
Visually inspect the exhaust pipes, muffler and hangers for cracks, deterioration, or damage. Start the engine and listen carefully for any exhaust gas leakage. Tighten connections or replace parts as necessary.
See also:
Automatic Transaxle Fluid
The fluid level should be in the “HOT” range of the dipstick, after the engine
and transaxle are at normal operating temperature. Check the automatic transaxle
fluid level with the engine running ...
Checking and replacing fuses
Replacing a Fusible Link
A fusible link will melt if the electrical circuits from
the battery are ever overloaded, thus preventing
damage to the entire wiring harness. (This
could be caused by a ...
If the engine overheats
If your temperature gauge indicates overheating, you experience a loss of power,
or hear loud pinging or knocking, the engine is probably too hot. If this happens,
you should:
1. Pull off the roa ...