Corrosion prevention & appearance care

See also:

If Engine Turns Over Normally but Does Not Start
1. Check fuel level. 2. With the key in the "OFF" position, check all connectors at ignition coil and spark plugs. Reconnect any that may be disconnected or loose. 3. Check the fuel li ...

Drive shafts and boots
Check the drive shafts, boots and clamps for cracks, deterioration, or damage. Replace any damaged parts and, if necessary, repack the grease. ...

Hood release
1. Pull the release knob to unlatch the hood. 2. Push the secondary latch lever to the left and lift the hood. 3. Hold the hood open with the support rod. Before closing the hood, return t ...