HAZARD WARNING SYSTEM
The hazard warning system should be used whenever you find it necessary to stop the car in a hazardous location. When you must make such an emergency stop, always pull off the road as far as possible.
The hazard warning lights are turned on by pushing in the hazard switch. This causes all turn signal lights to blink. The hazard warning lights will operate even though the key is not in the ignition.
To turn the hazard warning lights off, push the switch a second time.
See also:
Tire sidewall labeling
Federal law requires tire manufacturers
to place standardized information on
the sidewall of all tires. This information
identifies and describes the fundamental
characteristics of the tire and ...
2012 Hyundai Elantra review
One of the likely consequences of the federal government's push for more
stringent fuel economy standards is that more people will be driving smaller
cars in the future. Not too long ago, with the ...
Recommended Cold Tire Inflation Pressures
Tire label located on the driver's side of the center pillar outer panel gives
the cold tire pressures recommended for your vehicle with the original tire size,
the number of people that can ...