See also:

Checking the Battery
Keep the battery clean. Any evidence of corrosion around the battery posts or terminals should be removed using a solution of household baking soda and warm water. After the battery terminals are ...

Compliance Label
The compliance label is located on the driver's side of the center pillar outer panel. The label shows the maximum allowable weight of the fully loaded vehicle. This is called the GVWR (Gro ...

Lower Vehicle and Tighten Nuts
Lower the car to the ground by turning the wheel nut wrench counterclockwise. Then position the wrench as shown in the drawing and tighten the wheel nuts. Be sure the socket is seated completely ...