Smooth cornering
Avoid braking or gear changing in corners, especially when roads are wet. Ideally, corners should always be taken under gentle acceleration.
If you follow these suggestions, tire wear will be held to a minimum.
See also:
Tire Sidewall Labeling
Federal law requires tire manufacturers to place standardized information on
the sidewall of all tires. This information identifies and describes the fundamental
characteristics of the tire and ...
Wheel alignment and tire balance
The wheels on your vehicle were aligned and balanced carefully at the factory
to give you the longest tire life and best overall performance.
In most cases, you will not need to have your wheels al ...
Put the Jack in Place
The base of the jack should be placed on firm, level ground. The jack should
be positioned as shown in the drawing. ...