See also:

Compliance Label
The compliance label is located on the driver's side of the center pillar outer panel. The label shows the maximum allowable weight of the fully loaded vehicle. This is called the GVWR (Gro ...

Closing the hood
1. Before closing the hood, check the following: • All filler caps in engine compartment must be correctly installed. • Gloves, rags or any other combustible material must be removed from the engine ...

Keep Paint and Trim in Good Condition
Scratches or chips in the finish should be covered with "touch-up" paint as soon as possible to reduce the possibility of corrosion. If bare metal is showing through, the attention of a ...