See also:

License plate light bulb replacement
1. Loosen the retaining screws with a philips head screwdriver. 2. Remove the soket by turning it connterclockwise. 3. Remove the bulb by pulling it straight out. 4. Install a new bulb. 5. Reins ...

After Changing Wheels
If you have a tire gauge, remove the valve cap and check the air pressure. If the pressure is lower than recommended, drive slowly to the nearest service station and inflate to the correct press ...

Rear Combination Light
1. Open the trunk lid (4 Door) or tail gate (3 Door). 2. Remove the cover on the inside of luggage trim. 3. Remove the nuts of the rear combination light with a spanner. 4. Detach the rear ...