Manual Transaxle Shift Indicator (If Installed)
This indicator informs you which gear is desired while driving to save fuel. For example:
: Indicates that shifting up to the 3rd gear is desired (currently the shift lever is in the 2nd gear).
: Indicates that shifting down to the 3rd gear is desired (currently the shift lever is in the 4th gear).
NOTE :
When the system is not working properly, up & down arrow indicator will blink (Gear is not displayed.).
See also:
Driveshafts and Boots
Check the drive shafts, boots and clamps for cracks, deterioration, or damage.
Replace any damaged parts and, if necessary, repack the grease. ...
Specified Scheduled Procedures
These are the procedures such as inspections, adjustments and replacements that
are listed in the maintenance charts starting on page 5-4. These procedures must
be performed at the intervals shown ...
Engine oil and filter
The engine oil and filter should be changed at the intervals specified in the
maintenance schedule. If the car is being driven in severe conditions, more frequent
oil and filter changes are requir ...


