Sunvisor
Use the sunvisor to shield direct light through the front or side windows. To use a sunvisor, pull it downward. To use a sunvisor for a side window, pull it downward, unsnap it from the bracket (1) and swing it to the side (2).
Adjust the sunvisor extension forward or backward (4).
To use the vanity mirror, pull down the visor and slide the mirror cover (3). Push the switch to turn the light on or off. (if equipped)
• :
The light turns on.
• 
The light turns off.
CAUTION - Vanity mirror lamp (if equipped)
• Always have the switch in the off position when the vanity mirror lamp is not in use. If the sunvisor is closed without the lamp off, it may discharge the battery or damage the sunvisor.
• Always use the sunvisor extension, after swing the sunvisor to the side.
See also:
Higher speed motoring
Pre-Trip Inspections
1. Tires:
Adjust the tire inflation pressures to specification.
Low tire inflation pressures will result in
overheating and possible failure of the tires.
Avoid using worn or ...
Recommended Engine Coolant
When adding coolant, use only deionized water or soft water for your vehicle
and never mix hard water in the coolant filled at the factory. An improper coolant
mixture can result in serious malfun ...
Tire sidewall labeling
This information identifies and describes the fundamental characteristics of
the tire and also provides the tire identification number (TIN) for safety standard
certification. The TIN can be use ...