Air intake control

This is used to select outside (fresh) air position or recirculated air position.


 

This is used to select outside (fresh) air position or recirculated air position.

To change the air intake control position, push the control button.

Recirculated air position

 

The indicator light on the button illuminates when the recirculated air position


 

The indicator light on the button illuminates when the recirculated air position is selected.

With the recirculated air position selected, air from the passenger compartment will be drawn through the heating system and heated or cooled according to the function selected.

Outside (fresh) air position

 

The indicator light on the button will not illuminate when the outside (fresh)


 

The indicator light on the button will not illuminate when the outside (fresh) air position is selected.

With the outside (fresh) air position selected, air enters the vehicle from outside and is heated or cooled according to the function selected.

NOTICE

Prolonged operation of the heater in the recirculated air position (without air conditioning selected) may cause fogging of the windshield and side windows and the air within the passenger compartment may become stale.

In addition, prolonged operation of the air conditioning with the recirculated air position selected will result in excessively dry air in the passenger compartment.

WARNING

• Continue using the climate control system in the recirculated air position may allow humidity to increase inside the vehicle which may fog the glass and obscure visibility.

• Do not sleep in a vehicle with the air conditioning or heating system on. It may cause serious harm or death due to a drop in the oxygen level and/or body temperature.

• Continue using the climate control system in the recirculated air position can cause drowsiness or sleepiness, and loss of vehicle control. Set the air intake control to the outside (fresh) air position as much as possible while driving.

    See also:

    Protecting Your Hyundai from Corrosion
    By using the most advanced design and construction practices to combat corrosion, Hyundai produces cars of the highest quality. However, this is only part of the job. To achieve the long term corr ...

    Replacing the Wiper Blades
    To replace the wiper blades, raise the wiper to the vertical. To remove the wiper blade 1. Push down the wiper blade with the locking clip (1) pressed to detach it from the wiper arm. 2. Rais ...

    Power outlets
    (If installed) These are located in the quarter trim and on the rear main console. These supply 12V electric power to operate electric accessories or equipment only when the key is in the " ...