Mode selection
The mode selection button controls the direction of the air flow through the ventilation system.
The air flow outlet port is converted as follows:
Air flow is directed toward the upper body and face. Additionally, each outlet can be controlled to direct the air discharged from the outlet.
Air flow is directed towards the face and the floor.
Most of the air flow is directed to the floor, with a small amount of the air being directed to the windshield and side window defrosters.
Most of the air flow is directed to the floor and the windshield with a small amount directed to the side window defrosters.
Most of the air flow is directed to the windshield with a small amount of air directed to the side window defrosters.
See also:
Closing the fuel filler lid
1. To install the cap, turn it clockwise until it “click”. This indicates that
the cap is securely tightened.
2. Close the fuel filler lid and push it in lightly making sure that it is securely
c ...
To install the wiper blade
1. Put a new wiper blade onto the wiper arm and lower the wiper blade at the
level of the wiper arm as shown in the drawing.
2. Pull up the wiper blade until you hear an audible "click&quo ...
Starting
Starting
WARNING:
Never run the engine in a closed or poorly
ventilated area any longer than is needed to
move your car in or out of the area. The
carbon monoxide gas emitted is odorless
and c ...