Glove box lamp

When the ignition key is in the ignition switch, the smart key is in the smart key holder or the engine start/stop button is in the ACC position, if the glove box is opened, the glove box lamp will come on.
CAUTION
To prevent unnecessary charging system drain, close the glove box securely after using the glove box.
See also:
Tire Sidewall Labeling
Federal law requires tire manufacturers to place standardized information on
the sidewall of all tires. This information identifies and describes the fundamental
characteristics of the tire and ...
Vehicle load limit
Tire and Loading Information Label
Type A
Type B
Type C
The tire label located on the driver's
side of the center pillar outer panel
gives the original tire size, cold tire
pressures reco ...
Seat belt restraint system
WARNING
• For maximum restraint system protection, the seat belts must always be used
whenever the car is moving.
• Seat belts are most effective when seatbacks are in the upright position.
• Chi ...


