Side Repeater Light

1. Push the cover toward the front of vehicle and remove it.


1. Push the cover toward the front of vehicle and remove it.

2. Disconnect the power code.

3. Replace with a new bulb.

    See also:

    Raising the Car
    After inserting a wrench bar into the wheel nut wrench, install the wrench bar into the jack as shown in the drawing. To raise the vehicle, turn the wheel nut wrench clockwise. As the jack begin ...

    Block the Wheel
    Block the wheel that is diagonally opposite from the flat to keep the vehicle from rolling when the car is raised on the jack. ...

    Tire sidewall labeling
    Federal law requires tire manufacturers to place standardized information on the sidewall of all tires. This information identifies and describes the fundamental characteristics of the tire and ...