When to Wax Again

You should polish and wax the car again when water no longer beads on a clean surface but spreads out over a larger area.

    See also:

    Instrument and controls
    1. Panel Brightness Control Knob (Rheostat Switch). 2. 4WD Lock Switch (If installed). 3. Traction Control System (TCS) Switch (If installed) / Electronic Stability Control (ESC) Switch (If inst ...

    To install the wiper blade
    1. Put a new wiper blade onto the wiper arm and lower the wiper blade at the level of the wiper arm as shown in the drawing. 2. Pull up the wiper blade until you hear an audible "click&quo ...

    Armed Stage
    Park the car and stop the engine. Arm the system as described in the following paragraph. 1) Remove the ignition key from the ignition switch. 2) Make sure that all doors, tail gate (3 Door) and ...