TEMPORARY SPARE TIRE
The following instructions for the temporary spare tire should be observed:
1. Check inflation pressure as soon as is practical after installing the spare tire, and adjust to the specified pressure. The tire pressure should be periodically checked and maintained at the specified pressure while the tire is stored.
See also:
To resume cruising speed at more than approximately 25 mph (40 km/h)
If any method other than the CRUISE ONOFF switch was used to cancel cruising
speed and the system is still activated, the most recent set speed will automatically
resume when the RES/+ switch is ...
Recommended cold tire inflation pressures
Tire label located on the driver's side of
the center pillar outer panel gives the
cold tire pressures recommended for
your vehicle with the original tire size,
the number of people that can be ...
To install the wiper blade
1. Put a new wiper blade onto the wiper arm and lower the wiper blade at the
level of the wiper arm as shown in the drawing.
2. Pull up the wiper blade until you hear an audible "click&quo ...