If the Engine Stalls at a Crossroad or Crossing
If the engine stalls at a crossroad or crossing, set the shift lever in the N(Neutral) position and then push the vehicle to a safe place.
See also:
Raising the Car
After inserting a wrench bar into the wheel nut wrench, install the wrench bar
into the jack as shown in the drawing. To raise the vehicle, turn the wheel nut
wrench clockwise. As the jack begin ...
Hazard warning system
The hazard warning system should be used
whenever you find it necessary to stop the car
in a hazardous location. When you must make
such an emergency stop, always pull off the
road as far as pos ...
Catalytic Converter
Hyundai vehicle is equipped with a monolith type three-way catalytic converter
to reduce the carbon monoxide, hydrocarbons and nitrogen oxides contained in the
exhaust gas. Exhaust gases passing ...


