To turn cruise control off, do one of the following

o Push the CRUISE ON-OFF button (the CRUISE indicator light in the instrument cluster will go off).
o Turn the ignition off.
Both of these actions cancel cruise control operation. If you want to resume cruise control operation, repeat the steps provided in “To set cruise control speed” on the previous page.
See also:
Unlocking doors
1. Push the "UNLOCK" button on the transmitter.
2. Two turn unlock mode
At the same time the driver's door unlocks, the turn signal light will blink
twice to indicate that the system ...
If engine doesn't turn over or turns over slowly
1. If your vehicle has an automatic transaxle, be sure the shift lever is in
N (Neutral) or P (Park) and the emergency brake is set.
2. Check the battery connections to be sure they are clean and t ...
To increase cruise control set speed
Follow either of these procedures:
o Push the RES/+ switch and hold it. Your vehicle will accelerate. Release the switch
at the speed you want.
o Push the RES/+ switch and release it immediately ...


