To temporarily accelerate with the cruise control on
If you want to speed up temporarily when the cruise control is on, depress the accelerator pedal. Increased speed will not interfere with cruise control operation or change the set speed.
To return to the set speed, take your foot off the accelerator.
See also:
Seat Belt Warning Light and Chime
The driver's seat belt warning light and chime will activate to the following
table when the ignition switch is in "ON" position.
*1) Warning pattern repeats 11 times with an inte ...
If engine stalls while driving
1. Reduce your speed gradually, keeping a straight line. Move cautiously off
the road to a safe place.
2. Turn on your emergency flashers.
3. Try to start the engine again. If your vehicle will no ...
TPMS (Tire Pressure Monitoring System) Malfunction Indicator (If Installed)
TPMS malfunction indicator comes on for 3 seconds after the ignition key is turned
to the "ON" position. If the warning light does not come on, or continuously remains
on after comming ...