Malfunction Indicator Light

This light illuminates when there is a malfunction of an exhaust gas related


This light illuminates when there is a malfunction of an exhaust gas related component and the system is not functioning properly. This light will also illuminate when the ignition key is turned to the "ON" position, and will go out in a few seconds after the engine is started. If it illuminates while driving, or does not illuminate when the ignition key is turned to the "ON" position, take your car to your nearest authorized Hyundai dealer and have the system checked.

CAUTION:

Prolonged driving with the Emission Control System Malfunction Indicator Light illuminated may cause damage to the emission control systems which could effect drivability or fuel economy. If the Emission Control System Malfunction Indicator Light begins to flash ON and OFF, potential catalytic converter damage is possible. This could result in loss of engine power. Have the Engine Control System inspected as soon as possible by an authorized Hyundai dealer.

    See also:

    To increase cruise control set speed
    Follow either of these procedures: o Push the RES/+ switch and hold it. Your vehicle will accelerate. Release the switch at the speed you want. o Push the RES/+ switch and release it immediately ...

    Tire terminology and definitions
    Air Pressure: The amount of air inside the tire pressing outward on the tire. Air pressure is expressed in pounds per square inch (psi) or kilopascal (kPa). Accessory Weight: This means the combi ...

    Tire and Loading Information Label
    Type A Type B Type C Type D The tire label located on the driver's side of the center pillar outer panel gives the original tire size, cold tire pressures recommended for your vehicl ...