Filter replacement
It must be replaced when necessary, and should not be cleaned and reused. You can clean the filter when inspecting the air cleaner element. Clean the filter by using compressed air.
1. Loosen the air cleaner cover attaching clips and open the cover.
2. Wipe the inside of the air cleaner.
3. Replace the air cleaner filter.
4. Lock the cover with the cover attaching clips.
Replace the filter according to the Maintenance Schedule. If the vehicle is operated in extremely dusty or sandy areas, replace the element more often than the usual recommended intervals. (Refer to “Maintenance under severe usage conditions” in this section.)
CAUTION
• Do not drive with the air cleaner removed; this will result in excessive engine wear.
• When removing the air cleaner filter, be careful that dust or dirt does not enter the air intake, or damage may result.
• Use a HYUNDAI genuine part. Use of non-genuine parts could damage the air flow sensor.
See also:
Risk of rollover
WARNING:
o The 2WD Tucson is not designed for offroad
use. The 4WD Tucson is designed
primarily for use on paved roads. However,
occasional use in off-highway conditions
such as established unpav ...
SAFETY
Hyundai doesn't believe consumers should have to pay a premium for safety, so
a long list of safety features is included as standard equipment on all 2012
Accent models. A total of six airbags pro ...
Seat Belt Warning Light and Chime
The driver's seat belt warning light and chime will activate to the following
table when the ignition switch is in "ON" position.
*1) Warning pattern repeats 11 times with an inte ...