Checking the engine oil level

1. Be sure the vehicle is on level ground.


1. Be sure the vehicle is on level ground.

2. Start the engine and allow it to reach normal operating temperature.

3. Turn the engine off and wait for a few minutes (about 5 minutes) for the oil to return to the oil pan.

4. Pull the dipstick out, wipe it clean, and re-insert it fully.

5. Pull the dipstick out again and check the level. The level should be between F and L.

CAUTION

Do not overfill with engine oil. Engine damage may result.

If it is near or at L, add enough oil to bring the level to F. Do not overfill.


If it is near or at L, add enough oil to bring the level to F. Do not overfill.

Use a funnel to help prevent oil from being spilled on engine components.

Use only the specified engine oil. (Refer to “Recommended lubricants and capacities” in section 8.)

    See also:

    Horn
    To sound the horn, press the horn symbol on your steering wheel. Check the horn regularly to be sure it operates properly. NOTICE To sound the horn, press the area indicated by the horn symbol on ...

    Door Ajar Warning Light and Chime
    The door ajar warning light warns you that a door is not completely closed and the chime warns you that the key is in the ignition switch. NOTE : The warning chime only sounds whenever the key i ...

    SEAT BELT PRECAUTIONS
    WARNING: All occupants of the vehicle must wear their seat belts at all times. Seat belts and child restraints reduce the risk of serious or fatal injuries for all occupants in the event of a col ...