If the engine stalls at a crossroad or crossing
If the engine stalls at a crossroad or crossing, set the shift lever in the N (Neutral) position and then push the vehicle to a safe place.
See also:
Tire chains
Tire chains, if necessary, should be
installed on the front wheels. Be sure
that the chains are installed in accordance
with the manufacturer's instructions.
To minimize tire and chain wear, do no ...
Check spark plugs and ignition system
Inspect your spark plugs as described in section 7 and replace them if necessary.
Also check all ignition wiring and components to be sure they are not cracked, worn
or damaged in any way. ...
Risk of rollover
WARNING:
o The 2WD Tucson is not designed for offroad
use. The 4WD Tucson is designed
primarily for use on paved roads. However,
occasional use in off-highway conditions
such as established unpav ...


