Manual climate control system
To defog inside windshield
1. Select any fan speed except “0” position.
2. Select desired temperature.
3. Select the 
or
position.
4. The outside (fresh) air will be selected automatically.
If the outside (fresh) air position is not selected automatically, press the corresponding button manually.
To defrost outside windshield
1. Set the fan speed to the highest (extreme right) position.
2. Set the temperature to the extreme hot position.
3. Select the position.
4. The outside (fresh) air will be selected automatically.
See also:
Recommended lubricants and capacities
To help achieve proper engine and powertrain performance and durability, use
only lubricants of the proper quality. The correct lubricants also help promote
engine efficiency that results in impro ...
Key Positions
WARNING:
The engine should not be turned off or the key removed from the ignition key
cylinder while the vehicle is in motion. The steering wheel is locked by removing
the key.
o "START&q ...
Specified Scheduled Procedures
These are the procedures such as inspections, adjustments and replacements that
are listed in the maintenance charts starting on page 5-4. These procedures must
be performed at the intervals shown ...