Rear view camera
The rearview camera will activate when the back-up light is ON with the ignition switch ON and the shift lever in the R position.
This system is a supplemental system that shows behind the vehicle through the monitor while backing-up.
WARNING
• This system is a supplementary function only. It is the responsibility of the driver to always check the inside/outside rearview mirror and the area behind the vehicle before and while backing up.
• Always keep the camera lens clean. If the lens is covered with foreign matter, the camera may not operate normally.
NOTICE
The rearview camera may not operate normally, in extremely high or low temperatures (operating temperature : -13°F~149°F (-20°C~65°C)).
See also:
Automatic climate control system
To defog inside windshield
1. Select desired fan speed.
2. Select desired temperature.
3. Press the defrost button ( ).
4. The outside (fresh) air position will be selected automatically.
If th ...
Hood Release
1. Pull the release knob to unlatch the hood.
2. Pull the secondary latch lever up and lift the hood.
3. Pull the support rod from the hood.
4. Hold the hood open with the support rod.
Bef ...
Trip computer
(If installed)
The trip computer is a microcomputer-controlled
driver information gauge that displays
information related to driving, such as a tripmeter,
distance to empty, average fuel consump ...