Closing the hood

1. Before closing the hood, check the following:

• All filler caps in engine compartment must be correctly installed.

• Gloves, rags or any other combustible material must be removed from the engine compartment.

2. Lower the hood halfway and push down to securely lock in place.

WARNING

• Before closing the hood, ensure that all obstructions are removed from the hood opening. Closing the hood with an obstruction present in the hood opening may result in property damage or severe personal injury.

• Do not leave gloves, rags or any other combustible material in the engine compartment. Doing so may cause a heat-induced fire.

• Always double check to be sure that the hood is firmly latched before driving away. If it is not latched, the hood could open while the vehicle is being driven, causing a total loss of visibility, which might result in an accident.

• Do not move the vehicle with the hood raised. The view will be blocked and the hood could fall or be damaged.

    See also:

    DEFROSTING/DEFOGGING
    Use the heating/ventilation system to defrost or defog the windshield: To remove interior fog on the windshield; o Set the air flow control to the defrost () position (The A/C will automatical ...

    Seat Cushion Height Adjustment (Driver's Seat only)
    To raise or lower the front part of the seat cushion, turn the knob forward or rearward. ...

    Electronic stability control (ESC)
    The Electronic Stability control (ESC) system is designed to stabilize the vehicle during cornering maneuvers. ESC checks where you are steering and where the vehicle is actually going. ESC applie ...