Key positions
Key positions
CAUTION:
The engine should not be turned off or the
key removed from the ignition key cylinder
while the car is in motion. The steering
wheel is locked by removing the key.
o "START"
The engine is started in this position. It will crank until you release the key.
NOTE:
Do not hold the key in the "START" position
for more than 15 seconds.
o "ON"
When the key is in the "ON" position, the ignition is on and all accessories may be turned on. If the engine is not running, the key should not be left in the "ON" position. This will discharge the battery and may also damage the ignition system.
o "ACC"
With the key in the "ACC" position, some electrical accessories (radio, etc.) may be operated.
o "LOCK"
The key can be removed or inserted in this position.
To protect against theft, the steering wheel locks by removing the key.
NOTE:
If difficulty is experienced in turning the
ignition key to the START position, turn the
steering wheel right and left to release the
tension and then turn the key.
To remove the ignition key
1. Turn the ignition key to the "ACC" position.
2. Simultaneously push and turn the ignition key counterclockwise from the "ACC" position to the "LOCK" position.
3. The key can be removed in the "LOCK" position.
See also:
To Clean the Vinyl Upholstery
To clean the vinyl upholstery, first remove loose dirt and dust with a vacuum
cleaner. Then apply a solution of mild soap or detergent and water using a clean
sponge or soft cloth. Allow this to s ...
Changing the climate control air filter
(For Evaporator and Blower Unit)
(If Installed)
The climate control air filter is located in front of
the evaporator unit behind the glove box.
It helps to decrease the amount of pollutants
enter ...
CLIMATE CONTROL AIR FILTER
(For evaporator and blow unit)
The climate control air filter is located in front of the evaporator unit behind
the glove box.
It operates to decrease the amount of pollutants entering the car.
...