Heating controls

For normal heating operation, set the air intake


For normal heating operation, set the air intake control to the fresh air (the) position and
the
air flow control to the floor (position.)
position.

For faster heating, the air intake control should be set in the recirculate (If the windows fog up, set the air flow control to) position.


If the windows fog up, set the air flow control to the defrost (on) position. (The A/C will be
on
automatically and "Fresh" mode will be activated.) For maximum heat, rotate the temperature control to "Warm".

    See also:

    High Beam Indicator Light
    The high beam indicator light comes on whenever the headlights are switched to the high beam or flash position. ...

    Manual heating and air conditioning
    The heating and cooling system can be controlled manually by pressing buttons or turning knob(s) other than the AUTO button. In this case, the system works sequentially according to the order of b ...

    Luggage Compartment Light
    1. Open the trunk lid (4 Door) or tail gate (3 Door). 2. Carefully remove the cover with a flathead screwdriver. 3. Replace with a new bulb. ...