Heating and cooling control
1. Side Defroster Nozzle
2. Side Ventilators
3. Windshield Defroster Nozzles
4. Center Ventilators
CENTER VENTILATOR
The center ventilators are located in the middle
of the dashboard. To change the direction of the
air flow, move the knob in the center of the vent
up-and-down and side-to-side. The vents are
opened when the vent knob is moved to ""
position. The vents are closed when the vent
knob is moved to "". Keep these vents
clear
of any obstructions.
SIDE VENTILATOR
The side ventilators are located on each side of
the dash board. To change the direction of the
air flow, move the knob in the center of the vent
up-and-down and side-to-side. The vents are
closed when the vent knob is moved to ""
position. The vents are opened when the vent
knob is moved to "". Keep these vents
clear
of any obstructions.
See also:
Replacement of Light Bulbs
Before attempting to replace a light bulb, be sure the switch is turned to the
"OFF" position.
The next paragraph shows how to reach the light bulbs so they may be changed.
Be sure to r ...
USE OF LIGHTS
Check your lights regularly for correct operation and always keep them clean.
When driving during the day in conditions of poor visibility, it is helpful to drive
with headlights on low beam. This ...
POWER OUTLET
These supply 12V electric power to operate electric accessories or equipment.
CAUTION:
o Only use the power outlet when the engine is running. Unplug the plug from
the power outlet when the engi ...