Side Repeater Light

1. Push the cover toward the front of vehicle and remove it.
2. Disconnect the power code.
3. Replace with a new bulb.
See also:
Lower Vehicle and Tighten Nuts
Lower the car to the ground by turning the wheel nut wrench counterclockwise.
Then position the wrench as shown in the drawing and tighten the wheel nuts. Be
sure the socket is seated completely ...
MAX A/C-Level (B, D)
To operate the MAX A/C, turn the temperature knob to extreme left. Air flow is
directed toward the upper body and face. In this mode, the air conditioning and
the recirculated air position will ...
Re-install Wheel Nuts
To reinstall the wheel cover, hold it on the studs, put the wheel nuts on the
studs and tighten them finger tight. The nuts should be installed with their small
diameter ends directed inward. Ji ...


