Rear Combination Light
1. Open the trunk lid (4 Door) or tail gate (3 Door).
2. Remove the cover on the inside of luggage trim.
3. Remove the nuts of the rear combination light with a spanner.
4. Detach the rear combination lamp by pulling it out (4 Door) or remove the mounting screws of the rear combination lamp with a phillips screwdriver (3 Door).
5. To replace the rear combination light, take it out from the bulb holder by turning it counterclockwise.
(1) Tail Light
(2) Turn Signal Light
(3) Back-up Light
(4) Stop/Tail Light
6. Install the new bulb.
See also:
Cargo
Another surprise was this little car's big cargo area. At 15.9 cubic feet
with the rear seats in place, the Accent far surpasses the Yaris' 9.5 cubic feet
of cargo volume, and it's not far from th ...
LUGGAGE NET
When loading the objects in the luggage compartment, use the four rings located
in the luggage compartment to attach the luggage net as shown illustration. This
will help prevent the objects f ...
Electric Type
The outside rearview mirrors can be adjusted to your preferred rear vision, both
directly behind the vehicle, and to the rear of the left and right sides.
The remote control outside rearview mirr ...