To Check the Oil Level

Before checking the oil, warm up the engine to the normal operating temperature


Before checking the oil, warm up the engine to the normal operating temperature and be sure it is parked on level ground. Turn the engine off.

Wait five minutes, then remove the dipstick, wipe it off, fully reinsert the dipstick and withdraw it again. Then note the highest level the oil has reached on the dipstick. It should be between the upper ("F") and lower ("L") range.

WARNING:

Be very careful not to touch the radiator hose when checking the engine oil as it may be hot enough to burn you.

    See also:

    Fan speed control
    The ignition switch must be in the ON position for fan operation. The fan speed control knob allows you to control the fan speed of the air flowing from the ventilation system. To change the fan ...

    Heating and Cooling Control
    1. Side Defroster Nozzle 2. Side Ventilator 3. Windshield Defroster Nozzle 4. Center Ventilator ...

    FAMILY LIFESTAGE
    In Diapers: The Latch connectors are hard to get to, which makes it difficult to install a child-safety seat. In School: Kids in booster seats have enough legroom and headroom to sit comfortably ...