HEATING CONTROLS

For normal heating operation, set the air intake control to the fresh air ()


For normal heating operation, set the air intake control to the fresh air (position and the air flow control to the floor ())
position and the air flow control to the floor (position.)
position.

For faster heating, the air intake control should be set in the recirculate (position.)
position.

If the windows fog up, set the air flow control to the defrost (position (The A/C will automatically be turned on and "Fresh" mode will be activated.).)
position (The A/C will automatically be turned on and "Fresh" mode will be activated.).

For maximum heat, move the temperature control to "Warm".

    See also:

    Cigarette lighter
    For the cigarette lighter to work, the key must be in the "ACC" position or the "ON" position. To use the cigarette lighter, push it all the way into its socket. When the elem ...

    REAR WINDOW DEFROSTER SWITCH
    The rear window defroster is turned on by pushing in the switch. To turn the defroster off, push the switch a second time. The rear window defroster automatically turns itself off after about 20 ...

    Smooth cornering
    Avoid braking or gear changing in corners, especially when roads are wet. Ideally, corners should always be taken under gentle acceleration. If you follow these suggestions, tire wear will be he ...