HAZARD WARNING SYSTEM

The hazard warning system should be used whenever you find it necessary to stop


The hazard warning system should be used whenever you find it necessary to stop the car in a hazardous location. When you must make such an emergency stop, always pull off the road as far as possible.

The hazard warning lights are turned on by pushing in the hazard switch. This causes all turn signal lights to blink. The hazard warning lights will operate even though the key is not in the ignition.

To turn the hazard warning lights off, push the switch a second time.

    See also:

    ODOMETER/TRIP ODOMETER (With Trip Computer)
    1. Odometer The odometer records the total driving distance in miles, and is useful for keeping a record for maintenance intervals. NOTE: Federal law forbids alteration of the odometer of any v ...

    Type A
    2. Turn Signal Indicator Lights 3. High Beam Indicator Light 4. Automatic Transaxle Position Indicator Light (If Installed) 5. Odometer/Trip Odometer/Trip Computer (If Installed) 6. Overdrive Of ...

    Aux, USB and iPod® port (if equipped)
    If your vehicle has an aux and/or USB(universal serial bus) port or iPod port, you can use an aux port to connect audio devices and a USB port to plug in a USB, and an iPod port to plug in an iPod ...